Rational Utilization Of Bucket Teeth Of Excavator
Mar 26, 2022
With the continuous improvement of people's utilization of excavators, more and more projects are gradually adapted to the existence of this kind of equipment. However, with the use of excavators, the loss of bucket teeth of excavators is also increasing. How should we operate when using excavators in order to make more effective use of bucket teeth of excavators?
The importance of bucket teeth of excavator is self-evident, so we should pay more attention when using it, and we must take correct measures, so that the use of excavator can be normal. Then, how to use the bucket teeth of excavator correctly? Let's introduce it to you.
Correct selection: the use of excavator bucket teeth should first be selected correctly, and the determination of material needs to be carried out according to the environment. Only in this way can we better ensure the correct selection, and the correctly selected bucket teeth can also play the best performance in use.
Attention to angle: the excavator driver should pay attention to the angle of excavation during operation, and try to master it during excavation. When digging down, the bucket teeth are perpendicular to the working face, or the camber angle is not greater than 120 degrees, so as to avoid breaking the bucket teeth due to excessive inclination angle. It should also be noted that the excavation arm should not swing left and right under the condition of large resistance, which will break the bucket teeth and tooth seat due to excessive left and right force, because the mechanical design principle of most types of bucket teeth does not consider the left and right force design.
Timely replacement: the wear of the tooth seat is also very important to the service life of the bucket teeth of the excavator. After the tooth seat is worn out by 10% - 15%, it is recommended to replace the tooth seat, because there is a large gap between the worn tooth seat and the bucket teeth, which changes the fit between the bucket teeth and the tooth seat and the force point, and the bucket teeth break due to the change of the force point.
