Knowledge

Explosion on a Container Ship at Ningbo Zhoushan Port

On Friday, August 9th, 2024, a sudden explosion occurred on a container aboard a cargo ship at Ningbo Zhoushan Port. The initial judgment suggests that the substances involved in the explosion include

Classification and function of bucket tooth bolt of excavator

The dragline of the excavator is in the shape of dustpan, with tooth base plate and bucket teeth.

How to avoid unreasonable wear of bucket teeth

During excavation, the bucket teeth are at the front end of the bucket, so these bucket teeth will also contact the material first.

Identification method of bucket tooth appearance

Pure bucket teeth are cast with marks and product numbers; Counterfeit or without or with rough markings.

Causes of bucket tooth deformation of excavator

Warping deformation: warping deformation occurs at both ends or one end or even the peripheral edge and end of the casting after sand cleaning, which makes the middle of the casting concave, resulting

Pay attention to the following points in use, which can effectively prolong t...

During the use of the bucket teeth of the excavator, the bucket teeth outside the bucket Z wear 30% faster than those inside the bucket Z. the manufacturer of the bucket teeth of the excavator suggest

What are the ways to increase the service life of excavator bucket teeth

In the whole application process of the bucket teeth of the excavator, the wear of the bucket teeth on the outside of the bucket is 30% faster than that on the inside. It is proposed to replace the in

Causes and solutions of deviation of bucket teeth in excavator operation

If the spring in the walking main valve becomes loose or broken, or the valve core is stuck, it is likely to reduce the steam pressure and lead to walking deviation.

Performance requirements for bucket teeth and hooks of excavators

In active service, the bucket teeth of excavator not only suffer drag damage, but also bear certain impact. Therefore, the surface layer of the idealized bucket tooth raw material of the excavator sho

In the whole application process of bucket teeth, we need to see the office e...

In the whole application process of the bucket teeth of the excavator, the wear of the bucket teeth on the outside and inside of the bucket is 30% faster. It is proposed to replace the internal and ex

What is the method to prevent the bucket teeth of excavator from being damaged

The battery wire pile head is loose and the surface air is oxidized.

Optimization description of bucket tooth process structure

Many reasons for bucket tooth wear failure of excavator are caused by unreasonable design of process structure, especially in the overall structure and part structure.