How to avoid unreasonable wear of bucket teeth
May 12, 2022
1： During excavation, the bucket teeth are at the front end of the bucket, so these bucket teeth will also contact the material first. The resistance of the bucket teeth is also huge. If the initial excavation speed is too fast, due to the huge impact force between the material and the bucket teeth, it will easily damage the bucket teeth and cause unnecessary damage. Therefore, during the excavation operation, the excavation rate must be controlled, and the construction must not be carried out blindly to avoid serious damage to the fuselage caused by brute force operation.
2： During excavation, with the increase of excavation depth, the bucket teeth of the excavator will be more seriously worn due to the change of soil. Due to improper stress, the bucket teeth of excavator may be easily damaged due to the influence of pressure. In order to avoid this problem, in deep excavation, in addition to the control of excavation strength, we must reasonably grasp the direction and angle of excavation to avoid external force damage to vulnerable parts.
3： When excavating some hard materials, if the volume of the materials is large, in order to facilitate the operation, it is necessary to destroy them first, and then carry out the corresponding operation. In some practical work, in order to improve efficiency, many drivers often directly use the bucket to destroy materials. Although this method can also have an effect, if it is the case for a long time, the bucket teeth of the excavator are easy to lose. Therefore, in order to do a good job in maintenance, professional crushing tools should be used in crushing operation, so as to improve efficiency and protect construction machinery.
